PP 5020R – CTC-CARBONEU

PP 5020R

PP, 100% PCR, Good Comprehensive Performance, Injection Molding.

Properties	Test Condition	Typical Value	Unit	Test Standard
Mechanical
Tensile Strength	50mm/min	20-30	MPa	ASTM D638
Tensile Strain at Break	50mm/min	＞50	%	ASTM D638
Flexural Strength	5mm/min	900-1500	MPa	ASTM D790
Izod Notched Impact Strength	3.18mm	＞50	J/m	ASTM D256
Physical
Density	23^oC	0.90~0.93	g/cm³	ASTM D792
Melt Flow Index	230^oC, 2.16kg	12-22	g/10min	ASTM D1238
Flammability
Flame Rating	–	HB	–	UL 94

TypicalProcessing Conditions

	Range (Optimum)	unit
Pre-dry Temperature	110-120	^oC
Pre-dry Time	2-4	hrs
Melt Temperature	280-320	^oC
Rear Temperature	270-300	^oC
Middle Temperature	280-310	^oC
Front Temperature	280-320	^oC
Mold Temperature	90-120	^oC

*These are typical values of the product’s properties, and these values alone do not represent a sufficient basis for any part design and are not intended for use in not the permit of quality assurance.
The listed values are maybe different for pigmented material.