PC 1020-10

PC 1020-10

PC, 100% PCR, Water Bottle Source, High Viscosity, Colorable, Extrusion/Injection Molding.

PropertiesTest ConditionTypical ValueUnitTest Standard
Mechanical
Tensile Strength50mm/min61MPaASTM D638
Tensile Strain at Break50mm/min>50%ASTM D638
Flexural Strength5mm/min2000MPaASTM D790
Flexural Modulus5mm/min89MPaASTM D790
Izod Notched Impact Strength3.18mm650J/mASTM D256
Physical
Density23oC1.20g/cm3ASTM D792
Melt Flow Index300 oC, 1.2kg9.0~12g/10minASTM D1238
Molding Shrinkage0.5~0.7%ASTM D955
Flammability
Flame Rating1.6mmHBUL 94
Thermal
Temperature of Deflection Under Load1.8MPa125oCASTM D648
Optical Others
Visible Transmittance1mm70~80%ASTM D1003
Appearance/ L*Penetration D65/10
1mm
80~84Internal Method
Appearance/ a*Penetration D65/10
1mm
-3.0~-1.0Internal Method
Appearance/ b*Penetration D65/10
1mm
-2.0~-1.0Internal Method

TypicalProcessing Conditions

Range (Optimum)unit
Pre-dry Temperature110-120oC
Pre-dry Time2-4hrs
Melt Temperature280-320oC
Rear Temperature270-300oC
Middle Temperature280-310oC
Front Temperature280-320oC
Mold Temperature90-120oC
*These are typical values of the product’s properties, and these values alone do not represent a sufficient basis for any part design and are not intended for use in not the permit of quality assurance. 
 The listed values are maybe different for pigmented material.