PET 2120R
PET, OBP, Fishing Net Source, Injection/Extrusion Molding.
| Properties | Test Condition | Typical Value | Unit | Test Standard |
| Mechanical | ||||
| Tensile Strength | 50mm/min | ＞35 | MPa | ASTM D638 |
| Tensile Strain at Break | 50mm/min | ＞2.0 | % | ASTM D638 |
| Flexural Strength | 5mm/min | 2000~3000 | MPa | ASTM D790 |
| Flexural Modulus | 5mm/min | ＞75 | MPa | ASTM D790 |
| Izod Notched Impact Strength | 3.18mm | ＞25 | J/m | ASTM D256 |
| Physical | ||||
| Density | 23oC | 1.34~1.36 | g/cm3 | ASTM D792 |
| Melt Flow Index | 265 oC, 2.16kg | ＞80 | g/10min | ASTM D1238 |
| Intrinsic viscosity | – | 0.85~0.95 | dl/g | |
| Flammability | ||||
| Flame Rating | 1.6mm | HB | – | UL 94 |
TypicalProcessing Conditions
| Range (Optimum) | unit | |
| Pre-dry Temperature | 120 | oC |
| Pre-dry Time | 4-6 | hrs |
| Melt Temperature | 260-290 | oC |
| Rear Temperature | 230-260 | oC |
| Middle Temperature | 250-280 | oC |
| Front Temperature | 260-290 | oC |
| Mold Temperature | 50-90 | oC |
The listed values are maybe different for pigmented material.