PCABS 3026-C13R50

PCABS 3026-C13R50

PC/ABS Blend, 50% PCR, 13% Mineral Filled, Halogen-Free Flame Retardant, High Modulus, Injection Molding.

PropertiesTest ConditionTypical ValueUnitTest Standard
Mechanical
Tensile Strength50mm/min67MPaASTM D638
Tensile Strain at Break50mm/min18%ASTM D638
Flexural Strength5mm/min4300MPaASTM D790
Flexural Modulus5mm/min98MPaASTM D790
Izod Notched Impact Strength3.18mm100J/mASTM D256
Physical
Density23oC1.28g/cm3ASTM D792
Melt Flow Index240 oC, 5kg17g/10minASTM D1238
Molding Shrinkage0..3-0.5%ASTM D955
Flammability
Flame RatingV0UL 94
Thermal
Temperature of Deflection Under Load1.8MPa86oCASTM D648

TypicalProcessing Conditions

Range (Optimum)unit
Pre-dry Temperature80-90oC
Pre-dry Time4-6hrs
Melt Temperature220-240oC
Rear Temperature240-260oC
Middle Temperature245-265oC
Front Temperature250-270oC
Mold Temperature60-100oC
*These are typical values of the product’s properties, and these values alone do not represent a sufficient basis for any part design and are not intended for use in not the permit of quality assurance. 
 The listed values are maybe different for pigmented material.